LAP TOP STANDS
 

LAPTRAVELER.COM HOME
INSTALLATION INSTRUCTIONS >
SIDEKICK 2PHD-ND LAPTOP STAND WITH NO-DRILL BASE
> INSTALLATION INSTRUCTIONS
2PHD SERIES LAPTOP STAND WITH NO-DRILL BASE
INSTALLATION INSTRUCTIONS


Interactive Products Corporation manufactures the most versatile, ergonomic and rugged mobile computing and communication mounting systems available. We strive to meet and exceed our customer's expectations. We will manufacture specialized units to meet your mobile mounting needs. If you have any questions, call us toll-free at: 888-552-7867.

Thank you for your business.


WARRANTIES AND GUARANTEES:

All products are guaranteed to be free of manufacturers defects for a period of one year from the date of purchase. All Laptop Docking Stations are guaranteed not to crack or break for a period of one year from the date of purchase.

Interactive Products Corporation will repair or replace, at our discretion, without charge, any of our products which fail to perform due to defects in material or workmanship. Defects which result from damage or misuse, such as excessive force or improper installation, are not covered by this warranty.

Interactive Products will not be responsible for any incidental and/or consequential damage due to failure of any Interactive Products Corporation product.

Important: This Warranty gives you specific legal rights. You may have other rights which vary form state to state.


RETURN POLICY:

All sales are final unless approval is first obtained for merchandise return (1-888-552-7867). All items returned are subject to a restocking fee and handling charge. You must include a copy of your invoice for credit on all returned merchandise. Product returned due to customer error must be returned within 30 days of the date of purchase, and in resaleable condition. A restocking charge of 20% of the purchase price will be assessed, and original shipping cost will also be deducted.

Package the merchandise in the original shipping container, if possible, and include a note detailing the reason for return along with your receipt of purchase (photo copies will be accepted). Please include your name, address and phone number.


UPGRADES:

Should the customer decide to upgrade to a heavy-duty model, Interactive Products will swap the product and apply the purchase price (excluding freight and taxes) to the purchase of an upgraded unit. Product must be returned in resalable condition. Should any portion of the returned product be damaged, Interactive Products will contact the customer to determine the reduction to their credit.


"AIRBAG FRIENDLY " and "AIRBAG COMPATIBLE"

Much has been discussed, advertised and promoted regarding the compatibility between installation systems (mounting hardware) for mobile communications equipment and the "airbag deployment zones" in automobiles. Although many hardware manufacturers promote their products as being "airbag friendly" or "airbag compatible" the ultimate responsibility lies with the installer and/or end-user.

Any combination of installation hardware and mobile communication equipment that is not installed and positioned properly within the suggested dimensional parameters as defined by the vehicle manufacturer could potentially interfere with the deployment of the airbag(s). As a hardware manufacturer, Interactive Products Corporation can make suggestions and recommendations for the correct positioning and installation of our mounting systems. However, Interactive Products Corporation cannot control the ultimate placement and/or quality of the installation; nor can we control the type, size, style or placement of mobile communication equipment which the end-user chooses to mount onto, or with our products.

Manufacturers of public safety and law enforcement automobiles have provided, over the past few years, detailed information regarding the "airbag deployment zone(s)" in their specific vehicles. In printed material and via videotapes, car manufacturers have outlined and illustrated the area within each vehicle that is considered a safe zone for installing mobile communications equipment.

Note: Although airbag templates are available to assist in positioning equipment, they may not give you an exact image of the actual "deployment zone" of a rapidly inflating airbag. We strongly suggest you supplement the use of templates with the information provided by the vehicle manufacturer for a more accurate representation of available installation space.

~~~ WARNING ~~~

Do not install the mount system or position the equipment in the deployment path of an airbag. In the event of airbag deployment, mounting systems and/or equipment located within the airbag deployment zones can damage the airbag, prevent proper airbag inflation and/or become projectiles which could potentially cause personal injury or death. To determine airbag deployment zones and the area recommended for equipment installation, refer to vehicle manufacturer's manual. Interactive Products Corporation makes no warranties except for intended use and will not be held liable or responsible for any loss or damage, whether direct, indirect, incidental, special or consequential arising from the sale, use or misuse of Interactive Products Corporation products or the user's inability to use such products.



SUGGESTED LAPTOP POSITIONS

Laptop stand - airbag



NOTE: Assembly order:

1.No-Drill
2. Pedestal
3. Laptop Docking Station.




LapTraveler® 1PHD SERIES NO-DRILL MOUNT
PEDESTAL & DOCKING STATION ASSEMBLY INSTRUCTIONS

Note: Make sure all parts are present and read all instructions prior to assembly (SEE DETAIL).

ASSEMBLE NO-DRILL BASE MOUNT:

First determine the best configuration to suit your vehicle seat bolt. The most common seat bolt configurations are as follows:

Laptop stand no-drill 1
Configuration 1
Configuration 1:
Seat bolt straight down in floor.
Laptop stand no-drill 2
Configuration 2
Configuration 2:
Seat bolt straight back from glove box, toward seat.
Laptop stand no-drill 3
Configuration 3
Configuration 3:
45° angle from glove box to seat.

NO-DRILL DETAIL
Laptop stand no-drill


NO-DRILL HARDWARE PACKET INCLUDES:
PART #:
DESCRIPTION:
QTY:
4
shock control pad
1
8
neoprene washer
4
13
flat head allen bolt
4
15-1
¼-20 kep nuts
6
15-2
3/8-16 kep nuts
4
18-1
¼-20 button head bolt
2
19-1
fork bracket
1
19-2
hex stock
1
19-3
flat plate
1
20
glider
2
21
3-prong knob
1
22-1
hex key for ¼-20 bolts
1
26
5/16-18 set screw
1
  1. Loosen seat bolt and insert fork bracket (19-1) under seat track or seat bolt (Under seat track is most desirable, but if this is not possible, under seat bolt is sufficient). Re-tighten seat bolt.

  2. Attach hex stock (19-2) to fork bracket using three-prong knob (21) or 5/16-18 set screw (26). Choose the hole on the fork bracket that prevents three-prong knob from interfering with vehicle seat. If knob causes a conflict with the seat position, use the 5/16-18 set screw in place of the three-prong knob.

    NOTE: Make sure grooved portion of hex stock is lined up perfectly with the hole in the fork bracket so that the knob seats completely. If this is not done correctly, the hex stock may become deformed, which will cause it to get stuck in the fork bracket.

  3. Attach flat plate (19-3) underneath hex stock using 1/4-20 button head bolts (18-1) and 1/4-20 kep nuts (15-1). Use hex key (22-1) to tighten. Make sure button head bolts are tightened completely.

  4. Make sure flat plate is as close to the vehicle floor as possible. This allows you to screw swivel gliders (20) toward floor, and receive back pressure against seat track or seat bolt. This will substantially stabilize your laptop stand. Flat plate can have a downward slope toward vehicle floor. This will also help you receive more back pressure with the swivel gliders for added stability.

  5. Screw two of the 3/8-16 kep nuts (15-2) onto swivel gliders with washer facing up. Insert swivel gliders into flat plate from the bottom. Screw the last two 3/8-16 kep nuts onto swivel gliders with washer facing down toward flat plate. Use wrench to hold bottom kep nut in place while using a flat-head screwdriver to screw swivel gliders toward vehicle floor. Once flat plate is rigid, tighten the top and bottom kep nuts so swivel gliders are locked in place.

  6. You are now ready to install your pedestal to the No-Drill base.


LapTraveler® 2PHD SERIES NO-DRILL MOUNT
PEDESTAL & LAPTOP DOCKING STATION
ASSEMBLY INSTRUCTIONS

NOTE: MAKE SURE ALL PARTS ARE PRESENT AND READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY.

ATTACH PEDESTAL TO NO-DRILL BASE (SEE PEDESTAL DETAIL):

  1. ATTACH PEDESTAL TO NO-DRILL BASE (SEE PEDESTAL DETAIL):

    1. Attach tilt & rotate mechanism (2) to No-Drill (19) using flat head allen bolts (13), galvanized neoprene washers (8) and 1/4-20 kep nuts (15-1). Tighten allen bolts with hex key (22-1).

    2. Slide black tube with aluminum stud (3) into tilt & rotate mechanism (2), and tighten four-prong knob.

Note: Black tube (3) comes pre-assembled with 45º tube (3-1). 90º tube can be exchanged with 45º tube by loosening two-prong knob (9), removing 45º tube (3-1), and replacing with 90º tube (3-2) - your choice for positioning flexibility. (Pedestal height can be adjusted by loosening two-prong knob (9), raising or lowering telescoping tube, and retightening two-prong knob.)

NOTE: TELESCOPING TUBE IS COMPLETELY REMOVABLE - USE CAUTION WHEN ADJUSTING HEIGHT - TUBES (3-1 or 3-2) MAY COME OUT AND LAPTOP MAY BE DAMAGED IF YOU DROP IT!

ASSEMBLE DOCKING STATION (SEE DOCKING STATION DETAIL):

DOCKING STATION HARDWARE PACKET INCLUDES:
PART #:
DESCRIPTION:
QTY:
5
long carriage bolt
1
7
four-prong knob
1
10
L-bracket
2
11
quick release strap
1
14
machine bolt
1
15-1
¼-20 kep nut
1
15-3
6/32 kep nut
8
16
knob
2
18-3
6/32 button head bolt
8
22-3
hex key for 6/32 bolt
1
23
note pad clip
1
24
adjustable bracket
2

 

  1. Position laptop docking station (1) face up with the lip at the bottom.

  2. Line up holes in the notepad clip (23) (clipping mechanism toward the lip) with the top two holes in the docking station (SEE CLIP DETAIL).

  3. Attach notepad clip by inserting two button head bolts (18-3) through the notepad clip and docking station from the top, and securing with two kep nuts (15-3) screwed on from underneath. Make sure the teeth on the kep nut are touching the back of the docking station. Tighten with hex key (22-3).

  4. Turn docking station over (back facing up).

  5. Line up adjustable brackets (24) (tall sides facing inward) with remaining six holes on the back of the docking station.

  6. Attach by inserting the remaining six button head bolts through the docking station and brackets from underneath, and securing with the six remaining kep nuts. Make sure the teeth on the kep nut are touching the brackets. Tighten with hex key.

  7. Install Compu-Loc computer fastening system to docking station as follows (SEE DOCKING STATION DETAIL): Attach plastisol coated L- brackets (10) to top of the docking station using knobs (16) inserted from underneath.

  8. Insert the quick release strap (11) through the slots in the docking station. Feed from underneath into the right slot, across top of docking station, and down through the left slot.

ATTACH DOCKING STATION TO PEDESTAL:

  1. Set tilt & rotate mechanism (2) on bottom of docking station and attach using flat head allen bolts (13) and 1/4-20 kep nuts (15-1). Tighten allen bolts with hex key.
SIZE COMPU-LOC COMPUTER SECURING SYSTEM:
  1. Place laptop onto docking station and adjust L-brackets so they rest against the back of the laptop when laptop is resting on the front lip of the docking station.

  2. Remove laptop and move L-brackets 1/8" to 1/4" closer to the front lip and tighten
    L-brackets with eight-prong knob. *Your Compu-Loc Computer Fastening System is now set up so that the laptop will snap on and off of the docking station.

  3. Re-attach laptop to docking station. Open clamshell. Lay quick release strap across the keyboard, above the function keys so as not to impede any keys. Thread strap through buckle and synch laptop to docking station. Laptop can now be used without releasing the buckle.


2PHD-ND PEDESTAL DETAIL
Laptop stand pedestal




2PHD DOCKING STATION DETAIL
Laptop stand dock
Interactive Products Corporation
148 Bluff Road, Dayton, TN 37321
Toll Free: 888-552-7867 Fax: 423-775-0611
© 1996-2011 Interactive Products Corporation. All Rights Reserved.
All brand names and product names used on these web pages are
trademarks or trade names of their respective holders.
For further information contact
ipc@laptraveler.com.